Brand Repair Page
Taco Circulator Pump & Zone Valve Repair in NYC
AM Profs Inc diagnoses and repairs Taco circulator pumps, zone valves, and air separators across New York City boiler-based hot water heating systems. If a 007 series circulator needs its cartridge replaced, or a 570 series zone valve's powerhead has failed, we start from the actual fault.
24/7 urgent repair is available for Taco hydronic components, including weekends and holidays. A no-heat call tied to a failed circulator is treated as urgent.
Covered Equipment
007 series cartridge circulators
Smart ECM circulators
570 series zone valves
ZVC zone controls
Air separators
Taco strictly focuses on hydronic components rather than ductless or VRF systems — highly relevant for NYC's boiler-based radiator and baseboard heating systems.
Quick Answer
What is the most common Taco repair issue in NYC?
The most common Taco repair is a 570 series zone valve, which technicians commonly fix by hot-swapping the powerhead actuator rather than replacing the entire valve body. On circulators, the iconic 007 series is designed so the entire motor assembly (cartridge) can be replaced without draining the system, which keeps most circulator repairs fast and clean.
Last updated: July 2026
Why Taco Comfort Solutions Repairs Need Brand-Specific Service
Taco genuinely changed how the hydronics industry approached pump maintenance: the company popularized the maintenance-free cartridge circulator, specifically the iconic 007 series, which allows the entire motor assembly to be replaced without draining the whole system — a real practical improvement over older circulator designs.
Elwood White founded the company in 1920 as a valve manufacturer in Providence, Rhode Island. Taco Comfort Solutions remains a privately held company owned by the founding White family today.
What Makes The Brand Different
Designed for fast, clean swaps
The 007 series cartridge circulator's defining feature is that the motor assembly can be swapped without draining the system — a real time-saver on a NYC service call where minimizing water loss and downtime matters.
Similarly, the Taco 570 series zone valve — heavily used in NYC residential hot water heating — is commonly repaired by hot-swapping just the powerhead actuator rather than replacing the entire valve body, which keeps repairs fast.
Taco Comfort Solutions Systems We Service
Common symptoms, likely causes, what we check first, and when to call for each system type.
007 Series / ECM Circulator
Common symptoms: No circulation to a heating zone, unusual pump noise, or a leak at the pump body.
Likely causes: Worn cartridge/motor assembly, seized impeller, or a wiring fault.
What we check first: Cartridge condition, impeller operation, and wiring.
What work is done: Cartridge/motor assembly replacement (without draining the system) and wiring repair.
When to call: If a heating zone isn't circulating or the pump is making unusual noise.
570 Series Zone Valve
Common symptoms: A zone won't open or close, or heat isn't reaching a specific area.
Likely causes: Failed powerhead actuator, wiring fault, or a stuck valve body.
What we check first: Powerhead operation and wiring.
What work is done: Powerhead actuator hot-swap (valve body typically stays in place).
When to call: If a specific zone isn't heating while others work normally.
Frequently Asked Questions
Do you need to drain the system to fix a Taco 007 circulator?
No — that's the whole point of the cartridge design. The motor assembly can be replaced without draining the system, which is faster and cleaner than older circulator designs.
How do you fix a failed Taco 570 zone valve?
Usually by hot-swapping just the powerhead actuator rather than replacing the entire valve body — a common, fast repair on NYC hot water heating systems.
Does Taco make full heating systems, or just components?
Just hydronic components — circulator pumps, zone valves, zone controls, and air separators, not ductless, VRF, or boiler equipment itself.
Who owns Taco Comfort Solutions?
It remains a privately held company owned by the founding White family, since Elwood White founded it in 1920.
What areas of NYC do you cover for Taco repair?
We schedule Taco component repair across Manhattan, Brooklyn, Queens, and the Bronx.